CRW Finishing, Inc offers a unique On-Site Wastewater Treatment Solution based on Flocculant Technology.
Ringwood Environmental, Inc. designs, builds, and services the most complete line of Wastewater Treatment Systems available. From the economical TT-125 Manual System to the advanced CE-800 Automatic System, Ringwood Environmental, Inc. has the right system for any application. Call us today to discuss your specific requirements.
TT-125 (Manual)
- Economical, small footprint, manual system
- Maximum throughput: 100 GPH
- 200-gallon holding tank
- 100-gallon treatment tank
- 100-gallon clean water tank
- 1/4 cubic yard dumpster
- Pre-plumbed transfer pump
- (holding tank to treatment tank)
- UL approved control panel
- 1 horsepower heavy duty agitator with jet basket
Equipment Measurements: Length: 5′, Width: 5’2″, Height: 6’4″, Weight: approximately 1000 lbs.
TT-200 (Manual)
- Economical, small footprint manual system
- Maximum throughput: 400 GPH
- 200-gallon treatment tank
200-gallon clean water tank - 1/2 cubic yard dumpster
- UL approved control panel
- 1-1/2 horsepower heavy duty agitator with jet basket
- Driven bandfilter with roller for greater dewatering
Equipment Measurements: Length: 6’2″, Width: 5’2″, Height: 7’4″, Weight: approximately 1300 lbs.
200-SA (Semi-Automatic)
- Semi-Automatic operation with manual overrides
- Maximum throughput 400 GPH
- 200-gallon treatment tank
- Allen-Bradley controls
- UL approved control panel
- 1 horsepower heavy duty agitator with jet basket
- Single addition automatic chemical feed hopper
- Bandfilter roller for greater dewatering
- 1/2 Cubic yard dumpster included
- Access platform included
- Stainless steel construction standard
- Power requirement – 480 volt, 3 phase, 15 amp
Equipment Measurements: Length: 9’0″, Width: 5’8″, Height: 8’2″, Weight: approximately 1500 lbs.
CE-200 (Automatic)
- Full Automation GA Series with manual overrides
- Maximum throughput: 600 GPH
- 200-gallon treatment tank
- Allen-Bradley Micrologix PLC controls
UL approved control panel - 1 horsepower heavy duty agitator with jet basket
- Treatment tank auto washdown
Pre-plumbed for effluent pump - Automatic chemical feed system with 300 lb. hopper, complete with 2000 lb. super-bag support frame
- Double rollers for greater dewatering
Equipment Measurements: Length: 10’4″, Width: 5’6″, Height: 11’4″, Weight: approximately 3500 lbs.
CE-400 (Automatic)
- Full Automation GA Series with manual overrides
- Maximum throughput: 1200 GPH
400-gallon treatment tank - Allen-Bradley Micrologix PLC controls
- UL approved control panel
- 3 horsepower heavy duty agitator with jet basket
- Treatment tank auto washdown
- Pre-plumbed for effluent pump
- Automatic chemical feed system with 300 lb. hopper, complete with 2000 lb. superbag support frame
- Double rollers for greater dewatering
Equipment Measurements: Length: 10’4″, Width: 7’4″, Height: 11’11”, Weight: approximately 5000 lbs.
CE-800 (Automatic)
- Full Automation GA Series with Manual Overrides
- Maximum throughput: 2400 GPH
- 800-gallon treatment tank
- Allen-Bradley Micrologix PLC controls
UL approved control panel - Dual 3 horsepower heavy duty agitators with jet basket
- Treatment tank auto washdown
- Pre-plumbed for effluent pump
- Automatic chemical feed system with 300 lb. hopper, complete with 2000 lb. superbag support frame
- Double rollers for greater dewatering
Equipment Measurements: Length: 11’3″, Width: 9’4″, Height: 12’11”, Weight: 5000 lbs.
Trowal Cetrifugal Filters- Model Range ZM
- Cleaning by centrifugal force
- Sturdy design – easy operation
- Sludge basket is removed and emptied manually
- Capacity – 265 gallons
- Capacity sludge basket – 3 gallons
- Dimensions 55″ x 32″ x 63″
- Average power consumption – 1500 watts
Walter-Trowal’s wastewater systems are used after vibratory finishing the effluent (dirty process water) contains abrasive and metal fines. The system cleans the effluent before going to the drain or being recycled back to the finishing process.
The centrifugal filters allow the cleaned process water to be re-used and is pumped back to the finishing machine. Recycling of the process water reduces the consumption of water up to 98%. In addition, it reduces the cost of disposal.