• 2.5 Cu. Ft. Capacity
• Recirculation Compound System
• Acoustical Cover
• Polyurethane Wear Resistant Lining
• 1 HP 115V 1PH 60 Hz Motor

• 5 Cu. Ft.Capacity
• Recirculation Compound System
• Acoustical Cover
• 1-1/2 HP Motor, 2700 RPM 3 PHASE
• Please specify 220 or 440 volt

 Roto-Finish Gemini 400

Semi-flat bottom, U-shaped process channel heavy duty welded steel construction, polyurethane lined (50% additional lining in high wear areas), ribbed straight wall processing tub. Suspended on heavy duty coil springs.

4 cubic feet maximum operating capacity.

Main building component of this tub is certified pressure vessel material.

1 drain with 4" polyurethane pop-in drain screen. (Specify 1/16" or 1/8" holes or slots).

Straight out parts separation system with dam; hand lever operated gate. Gate is hinged at the dam lifting up to the screen during separation.

Unique drive system with adjustable top and bottom eccentric weights.

3 HP T-frame motor 230/460/3/60 (specify 230 or 460 volts). Motor mounted to non-vibrating base. Belt drive to main shaft.

Manual grease lubrication.

Painted Roto-Finish Smoke.

2,290 pounds approximate shipping weight.

On/Off base mounted control switch.

Flow through including compound pump, flow meter, water solenoid valve and all necessary hoses and fittings with machine mounted spray nozzle.

 Roto-Finish Gemini 700

Semi-flat bottom, U-shaped process channel, heavy duty welded steel construction, polyurethane lined (50% additional lining in high wear areas), ribbed straight wall processing tub. Suspended on heavy duty coil springs.

7 Cubic feet maximum operating capacity.

Main building component of this unit is certified pressure vessel material.

1 drain with 4" polyurethane pop-in drain screen (specify 1/16" or 1/8" holes or slots).

Straight out parts separation system with a dam; hand lever operated gate. Gate is hinged at the dam lifting up to the screen during separation.

Unique drive system with adjustable top and bottom eccentric weights.

3 HP T-frame motor 230/460/3/60 (specify 230 or 460 volts). Motor mounted to non-vibrating base. Belt drive to main shaft.

Manual grease lubrication.

DuPont Centari Acrylic Enamel "Smoke" with gloss hardener.

3,310 pounds approximate shipping weight.

On/Off base mounted control switch.

#940-0004 Electrical Compound Solution System:

Flow through including compound pump, flow meter, water solenoid valve, and all necessary hoses and fittings with machine mounted spray nozzle.

Semi-flat bottom, U-shaped process channel, heavy-duty welded steel construction, polyurethane lined (50% additional lining in high wear areas), ribbed straight wall processing tub.

Suspended on heavy-duty coil springs.

10 Cubic feet maximum operating capacity.

Main building component of this unit is certified pressure vessel material.

1 drain with 4" polyurethane pop-in drain screen (specify 1/16" or 1/8" holes or slots).

Straight out parts separation system with a dam; hand lever operated gate. Gate is hinged at the dam lifting up to the screen during separation.

Unique drive system with adjustable top and bottom eccentric weights.

5 HP T-frame motor 230/460/3/60 (specify 230 or 460 volts).

Motor mounted to non-vibrating base. Belt drive to main shaft.

Manual grease lubrication

DuPont Centari Acrylic Enamel "Smoke" with gloss hardener.

On/Off base mounted control switch.

Included: Flow through including compound pump, flow meter, water solenoid valve, and all necessary hoses and fittings with machine mounted spray nozzle.