HomeServicesEquipment & SuppliesAbout UsContact UsRequest Quote

Used Metal Finishing Equipment/Service & Repairs/Relining & Rebuilding

Used Roto-Finish MP-120-8-2 Spiratron Multi-Pass              

Continuous Process Vibratory Finisher   

New in 2000 (Serial# MP-120-8-2-00-A1) 

                                                            

NEMA 12 Control Panel 460 V/3ph/60 Hz, Electric Solution System, 16.8 Cubic Foot Operating Capacity, Includes Optional rinse bar, 43.5 feet of travel, first in first out processing, 5-minute minimum process time, 11-minute maximum process time, good condition.

 

Used Roto-Finish RM-2A Roto-Max  

High Energy Centrifugal Disc Up-flow Finishing System

New in 2000 (Serial# RM-2A-00-A4)

NEMA 12 Control Panel 460 V/3ph/60 Hz, 5hp Motor, 0-1 Hour timer, Electric Solution System, 2 Cubic Foot Capacity, Includes Optional parts hopper with pneumatic door, new spinner and rotor, good condition.

 

 

 

Used Roto-Finish ERC-1011 CPT           

Combo Vibratory Finisher  New in 1997 (Serial# ERC-1011C-97-E12)                              

FULLY LOADED 10 cubic feet operating capacity, 18 cubic feet total capacity, Cartridge drive system, 10 HP T-frame motor 480 Volts, recirculating oil lubrication system, collection tank, straight out parts separation system with a low profile dam; pneumatically operated gate, Gate Clearing/Automatic Unload, Rinse Station, Separation screen and frame, NEMA 12 Control Panel, Compound flow-through system tied into process timers for automatic on/off operation.

 


All used equipment is sold as is where is. For additional information contact crwfinishing@crwfinishing.com.      


Relining and Rebuilding

Relining and Rebuilding

Consider relining your existing bowl or tub, or, having it completely rebuilt. Rebuilt equipment is often 1/2 the cost of a new unit.

  • Vibratory bowls and tubs
  • Small and large tumbling barrels
  • Centrifugal barrels
  • Plastisol-coated separation screens
  • Urethane-coated separation screens
  • Urethane angled hole separation screens
  • Polyurethane patch

Relining/Rebuilding of mass finishing equipment available with Cold and hot pour polyurethanes in 75, 83, 90, 95 durometer hardness.


Service & Repairs

CRW Service Technicians are available for installation supervision, start-up and training, and or repair of all you mass finishing

equipment. Please click on our link below for further information and rates.

2017 SERVICE RATES

 

www.crwfinishing.comISO 9001
CRW Finishing, Inc - Your Mass Finishing Specialists